Make your oil change quick and easy with our 12V oil change pump/diesel pump. Avoid spills and unnecessary hassle and get the job done smoothly and efficiently.
The crocodile clips allow you to easily connect the pump to the battery.
The pump has a bracket so it can be easily mounted where needed.
Easily sucks oil up through the dipstick hole on the engine.
Specification:
Rated voltage: DC 12V
Rated power: 60W
Max pressure: Max. 0.8 MPa
Maximum flow: 5L/min
Pump diameter: approx. 4.8 cm, length: approx. 14.5 cm
Outlet pipe diameter: approx. 10 mm x 137 cm (Dia. * L)
Inlet pipe diameter: approx. 8mm, 6mm, length: approx. 110 cm
Cable length: approx. 68 cm
Clip length: approx. 8 cm
Color: Black
How to use:
1) Start by running the car engine for a while, when the oil temperature is around 50 degrees, start pumping oil.
2) Connect the pump to the power, let it run for a while, and see if the inlet and outlet are normal.
3) Then open the filler cap, remove the dipstick, force the hose to the bottom of the oil pan.
If no oil comes out or it pumps very slowly or intermittently, it is generally due to loose hoses and hose parts. You must reinstall hoses and fittings.
4) After pumping oil, remove the hose and then run the pump for a while, pump out the remaining oil inside the pump clean or pump water for a while until the pump head becomes clean.
5) If you have not used it for a long time, it cannot suck, just pour water into the pump and run the pump for a few minutes until the air is completely out.
Package includes:
1 x oil pump
1 x 10 mm outlet pipe
1 x 8 mm hose
1 x 6 mm hose
Note:
If you want to connect this pump to the mains, you need a power inverter.
Please allow 1-5 mm deviation due to manual measurement.
Due to the light and screen difference, the item's color may be slightly different from the pictures.